Table of Contents
Advertisement
P73356-F8E888-Aerocrsr-man.qxd
Troubleshooting
After entering the, "Control Panel", use your [Up and Down
Arrows] to select "System" and then press [Enter]. After
entering "System Properties" use your [Right Arrow] to
select "Device Manager". Then press [Tab] to bring your
selection to "Computer" and then use your [Down Arrow]
until your "Mouse" is highlighted. Then use your [Right
Arrow], [Right Arrow] to expand and select your mouse
driver or drivers.
After you have chosen your mouse driver you can now
modify it by removing the driver or changing the driver.
To remove the driver you have selected, use your [Tab] key
until the "Remove" tab is selected. Then press [Enter],
[Enter], this will remove the driver. Use your [Arrow Keys] to
select any other drivers and repeat the process until all but
one driver remains. Even if it is the wrong driver you can
use it and change it to the mouse driver you want.
After removing or changing the mouse driver, use your [Tab]
key until "Close" is selected and then press [Enter]. You will
have to reboot your computer. Use your [Windows® Key]
at the bottom left hand corner of your keyboard, if you have
one, if not, press {[Alt] + [S]}. Then use your [Up Arrow] to
select "Shut Down" and use your [Enter] key. Use your
[Arrow Key] to select "Restart" and press [Enter].
Problem #3
Q: After installing the mouse driver and rebooting, my mouse
will not work. How do I change the mouse driver without
mouse control?
A: See Problem #2.
1/14/01
2:10 PM
(continued)
5
Page 5
Advertisement
Table of Contents
