Table of Contents
Advertisement
P73356-F8E888-Aerocrsr-man.qxd
Hardware Installation
2.1 Hardware Installation
Your mouse connects to either a PS/2 mouse port
Universal Serial Bus (USV) port
look at the back of your computer for the port that is
designated for your mouse. Some PCs will have the word
MOUSE marked next to the PS/2 connector. If you are still
unsure, please refer to your hardware manual.
For USB mouse port installation, simply remove the PS/2-USB
adapter from the end of the connector before plugging the
mouse into the computer.
PS/2 Installation
a. Make sure that the computer is turned off.
b. Locate the computer PS/2 mouse port on the back of your
computer.
c. Plug your mouse into the appropriate port suggested above.
Check the box in which your mouse was shipped to verify the
ports supported.
d. Turn your computer on. At this point, your mouse will work
with the built-in Microsoft
extra features of your middle button, you must install the
included software.
1/14/01
2:10 PM
or a
. To check,
®
Operating System. To use the
2
Page 2
Advertisement
Table of Contents
