Summary of Contents for Belkin MiniScroller F8E841-BLK
Page 1
MiniScroller ™ Mouse User Manual F8E841-BLK P73429...
Page 3
Important Information The USB connector is compatible with Windows ® 98 and Windows USB Connector The PS/2 connector is compatible with Windows ® 3.x, 95, 98, NT, and 2000. PS/2 Connector ® 2000.
Introduction ABOUT YOUR MOUSE 1.1 An Introduction to your new Belkin MiniScroller ™ Mouse The Belkin MiniScroller ™ Mouse offers you ease of use on the Internet, eliminating the need for scroll bars. You can scroll smoothly through your documents or Web Pages, browsing them more quickly and more efficiently.
PS/2 Installation a. Make sure that the computer is turned off. b. Locate the PS/2 mouse port on the back of your computer. c. Plug your mouse into the appropriate port suggested above. Check the box in which your mouse was shipped to verify the ports supported.
Locate the Universal Serial Bus (USB) port on the back of your computer. b. Plug your mouse into the port. Check the box in which your mouse was shipped to verify the ports supported. c. Sometimes, when connecting the mouse into a USB port, Windows will detect the mouse and start the Add New Hardware Wizard.
1. Software Installation A step-by-step guide to getting your mouse set up Important: Before installing the MiniScroller strongly recommended that you remove all other third party mouse drivers. DO NOT REMOVE THE WINDOWS MOUSE DRIVERS. WARNING: To avoid damage, turn your computer off before plugging or unplugging any pointing devices.
The PS/2 Mouse on COM1 or Serial Mouse on COM2? If you are using a PS/2 mouse (refer to section 1.2) then the driver must state that it is using a PS/2 driver. If you are using a Serial mouse (refer to section 1.2) then the driver must state that it is using a Serial driver on COM1 or COM2.
Page 10
Even if it is the wrong driver you can use it and change it to the mouse driver you want. After removing or changing the mouse driver, use your...
Page 11
"Enter" key. Use your "Arrow" Key to select "Restart" and press "Enter". After installing the mouse driver and rebooting, my mouse will not work. How do I change the mouse driver without mouse control? Use your "Windows "Key at the bottom left hand ®...
Page 12
3. Troubleshooting (continued) the mouse driver, use your "Tab" key to select "Properties" and then press "Enter". Use your "Right" Arrow key to choose the "Driver" tab and then use your "Tab" key to choose "Update driver" or "Change Driver"...
Page 13
Why does my external mouse not work with my laptop computer? You may have to disable the onboard mouse in order to use an external mouse. Try looking in your CMOS or BIOS in order to disable the onboard mouse. If you do...
Page 14
"Auto Browsing" allows you to scroll automatically by clicking the wheel once. This will change the look of the pointer to a dot with four arrows pointing from it. Move the mouse in the direction that you wish to browse and the page will scroll in that direction.
Page 15
However, if the pointer should skip or move abnormally on screen, we recommend you clean your mouse manually. a. First, turn the retainer ring counter clockwise to remove the ball b.
Page 16
Select "Settings". c. Select "Control Panel". d. Select "Add/Remove Programs". e. Select "Belkin Mouse Driver", then click "Add/Remove". f. You will be asked if you are sure if you want to remove "Browser Mouse" and all of its components. Click "Yes".
Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
Need help?
Do you have a question about the MiniScroller F8E841-BLK and is the answer not in the manual?
Questions and answers