Chopin InFraneo Quick Installation And First Test page 2

INSTALL YOUR INFRANEO
A. Contents
Infraneo
Universal
sliding cell
B. Unpacking
Keep this packaging. It is essential to use it to transport the device.
C. Installation
1. Install the Infraneo on a stable, horizontal surface.
• Do not place the Infraneo behind a window, especially
if it is in direct sunlight.
• The ambient temperature should be around 20°C.
2. Connect the unit with the power cable.
• To avoid any problem related to electrical loads, we recommend that you connect power
conditioner between the Infraneo and the power supply.
3. If necessary, connect the printer to the USB port, which is located on the lower part of
the front panel of the device.
USB stick with software
and user's manual
Grain and/or milling kit
(depending on version)
RJ45 Dedicated USB
connector port for the
printer
USB stick for data
backup
Cleaning kit
Free USB ports
Power cable
Printer
(option)