CommScope AMP NETCONNECT SL Series Instruction Sheet

Small Base Outlet Kit 1375005-[ ]
Cover
1. INTRODUCTION
This instruction sheet provides installation procedures
for the SL Series Furniture Outlet Kits shown in 
Figure 1.
Reasons for reissue of this document are provided in
Section 5, REVISION SUMMARY.
Dimensions are in millimeters with [inches in
NOTE
brackets]. Figures and illustrations are for
reference only and are not drawn to scale.
i
Standard 110 style keystone and Shielded SL style
NOTE
jacks will NOT fit into the furniture outlets.

i
Refer to Product Catalog 82164 for a listing of
NOTE
available jacks and inserts.

i
To obtain information on products, call PRODUCT
INFORMATION at the number at the bottom of this
2. DESCRIPTION
Each outlet kit includes a base and cover. The plastic
covers are available in five standard colors: light
almond, black, white, gray, and electrical ivory. The
metal base attaches directly to the furniture panel, and
accommodates two size panel knockout openings.
See Figure 2.
To obtain information on CommScope
your local CommScope account representative,
®
®
PartnerPRO Network Partner or visit our website at
www.commscope.com

SL Series
Furniture Outlet Kits
Small Base
Figure 1



products, contact
®
Large Base Outlet Kit 1375006-[ ]
Large Base
Cover
34.92
[1.375]
44.45
[1.750]
3. MOUNTING PROCEDURES
Remove the appropriate knockout from the furniture
panel or base and pull the cables through the opening.
© 2016 CommScope, Inc.
All Rights Reserved
Instruction Sheet
408-8397
21 DEC 16 Rev D
69.85 [2.750]
76.2 [3.000]
Figure 2
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
1 of 2