Battery Installation - Coleman AT200-B Assembly Instructions Manual

BATTERY INSTALLATION

BATTERY INSTALLATION
1. Insert battery into battery tray with the battery terminal nuts and bolts
already installed on the battery.
2. Attach both battery straps
3. Remove battery terminal nuts and bolts from battery.
4. Connect positive cable to positive battery terminal and re-screw battery
terminal bolt.
5. Connect negative cable to negative battery terminal and re-screw
battery terminal bolt.
6. Reinstall seat.
NOTICE
TIP
WARNING
Battery electrolyte is poisonous and
dangerous, contains sulfuric acid,
which can cause severe burns. Avoid
contact with skin, eyes or clothing.
Always shield your eyes when
working near batteries.
KEEP OUT OF REACH OF CHILDREN.
DO NOT OPEN BATTERY.
Ventilate when charging or using in
an enclosed space.
KEEP AWAY FROM SPARKS, FLAMES,
CIGARETTES OR OTHER SOURCES OF
IGNITION.
Positive (+) cable is red in color.
Negative (-) cable is black in color.
This Coleman Powersports AT200 ATV has two positive (+) cables red
in color. Both attach to the positive terminal on battery.
Battery
9