Table of Contents
Advertisement
Quick Links
IF YOU FORGET THE PASSCODE
FIRST PASSCODE
1. With door open, press reset button inside the door.
2. Yellow light is on, enter new passcode within ten seconds.
3. Enter new code (3 to 8 digits) followed by "*" or "#" .
4. Safe will beep and yellow light will turn off.
SECOND PASSCODE
1. With door open, press "0 - 0" then press reset button
2. Yellow light is on, enter new passcode within ten seconds.
3. Enter new code (3 to 8 digits) followed by "*" or "#" .
4. Safe will beep and yellow light will turn off.
CARE & MAINTENANCE
• The locking lugs may need to occasionally be lubricated with a clear
grease (petroleum jelly) to insure proper operation.
• Do not overfill the Trunk Safe as it may hinder the operation of
the locking lugs.
• Change batteries periodically.
Item No.: 75406
Ext. Dimensions: 7.0" x 42.0" x 13.0"
Weight: 69 Lbs
Power: 4 AA batteries (not included)
Customer Service: PO Box 1848, Grand Island, NE 68802-1848
1-877-214-4470 | Email: info@snapsafe.com
586007
19SNAP0037 | 08/2019
Owner's Manual
Trunk Safe II
Item No. 75406
Advertisement
Table of Contents
Related Manuals for Hornady SnapSafe Trunk Safe II
Summary of Contents for Hornady SnapSafe Trunk Safe II
- Page 1 IF YOU FORGET THE PASSCODE FIRST PASSCODE 1. With door open, press reset button inside the door. 2. Yellow light is on, enter new passcode within ten seconds. 3. Enter new code (3 to 8 digits) followed by “*” or “#” . 4.
- Page 2 SETUP OPERATION Knob Locked Override Key Cover OPEN SAFE WITH OVERRIDE KEY TO OPEN THE SAFE WITH PASSCODE 1. Insert override key and turn left to 1. To unlock and open safe, enter the passcode followed by an “*” or “#” . unlock safe.
Need help?
Do you have a question about the SnapSafe Trunk Safe II and is the answer not in the manual?
Questions and answers