Belkin Bitronics F1U127-KIT User Manual page 39

5. Select the Printer/FDD tab.
6. Make sure Use as printer connector is selected and choose the desired port
mode required by the printer. There are three options available on this screen:
1. Normal (Output only)
2. Bi-directional (default)
3. ECP (requires IEEE 1284 printer/parallel cable)
7. Select ECP and click OK to save results and close the window.
8. Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in
the BIOS.
Sony PCG-729:
1. In Windows ®
2. Select Tool Center.
3. Select Sony Notebook Setup.
4. Select the Printer/FDD tab.
5. Make sure Use as printer connector is selected and choose the desired port
mode required by the printer. There are three options available on this screen:
1. Normal (Output only)
2. Bi-directional (default)
3. ECP (requires IEEE 1284 printer/parallel cable)
6. Select ECP and click OK to save results and close the window.
7. Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in
the BIOS.
Appendix
95, open the Start Menu.
(continued)
34