WARNING-Stability Hazard
A television set may fall causing serious personal injury or death. Many injuries, particulary to children, can be avoided by talking simle precautions such as:
-ALWAYS use cabinets stands or mounting method recommended by the manufacturer of the television set.
-ALWAYS use furniture that can safety support the television set.
-ALWAYS ensure the television set is not overhanging the edge of supporting furniture.
-ALWAYS educate children about the dangers of climbing on furnture to reach the television set or its controls.
-ALWAYS route cords and cables connected to your television so the cannot be tripped over, pulled or grabbed.
-NEVER place the television set in an unstable location.
-NEVER place a television set on tall furniture (for example,cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
-NEVER place the television set on cloth or other materials that may be located between the television set and suporting furniture.
-NEVER place items that might tempt children to climb, such as toys and remote controls,on the top of the television or furniture on which the televison is placed.
If the exiting television set is going to be retained and relocated,the same considerations as above should be applied.
CAUTION
-Replacement of a battery with an incorret type that can defeats a safeguard (for example, in the case of some lithium battery types);
-Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
-Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
-A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
-Risk of fire or explosion if the battery is replaced by an incorrect type.
6
Need help?
Do you have a question about the 4T-C60BK2UD and is the answer not in the manual?
Questions and answers
tv only shows low storade warning, cant get to the home screen
connect to the internet
To connect a Sharp 4T-C60BK2UD TV to the internet, use one of the following methods:
1. Wi-Fi Connection:
- Ensure your TV is powered on.
- Press the HOME button on the remote.
- Navigate to Settings.
- Select Network and then Wi-Fi.
- Choose your Wi-Fi network from the list and enter the password.
- Confirm the connection.
2. Wired Connection (LAN):
- Connect an Ethernet cable from your router to the LAN (10/100BASE-T) port on the TV.
- Press the HOME button on the remote.
- Go to Settings > Network > Wired Connection.
- The TV should automatically detect and connect to the network.
Once connected, you can access online features such as streaming apps and software updates.
This answer is automatically generated
Factory reset without using the remote
To factory reset the Sharp 4T-C60BK2UD without using the remote, follow these steps:
1. Ensure the TV is plugged in and powered on.
2. Locate the physical buttons on the TV itself (usually on the back or side).
3. Press and hold both the "Volume Down" and "Input" buttons on the TV.
4. While holding those buttons, press and release the "Power" button on the TV.
5. Continue holding the "Volume Down" and "Input" buttons until the TV restarts and the reset process begins.
This will reset the TV to its factory settings, erasing all data and configurations.
This answer is automatically generated