Table of Contents
Advertisement
Remote control unit (x1)
Stand unit
Stand base
with letter "R"
NOTE:This device includes a voice command infrared remote control.
Brand:SHARP
Model:GB346WJSA
Remote control unit
1
2
2
"AAA" size battery (x2)
Screws ( x4)
Stand base
with letter "L"
2
"AAA" size battery
Initial setup guide
Power cord
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 4T-C60BK2UD and is the answer not in the manual?
Questions and answers
tv only shows low storade warning, cant get to the home screen
connect to the internet
To connect a Sharp 4T-C60BK2UD TV to the internet, use one of the following methods:
1. Wi-Fi Connection:
- Ensure your TV is powered on.
- Press the HOME button on the remote.
- Navigate to Settings.
- Select Network and then Wi-Fi.
- Choose your Wi-Fi network from the list and enter the password.
- Confirm the connection.
2. Wired Connection (LAN):
- Connect an Ethernet cable from your router to the LAN (10/100BASE-T) port on the TV.
- Press the HOME button on the remote.
- Go to Settings > Network > Wired Connection.
- The TV should automatically detect and connect to the network.
Once connected, you can access online features such as streaming apps and software updates.
This answer is automatically generated
Factory reset without using the remote
To factory reset the Sharp 4T-C60BK2UD without using the remote, follow these steps:
1. Ensure the TV is plugged in and powered on.
2. Locate the physical buttons on the TV itself (usually on the back or side).
3. Press and hold both the "Volume Down" and "Input" buttons on the TV.
4. While holding those buttons, press and release the "Power" button on the TV.
5. Continue holding the "Volume Down" and "Input" buttons until the TV restarts and the reset process begins.
This will reset the TV to its factory settings, erasing all data and configurations.
This answer is automatically generated