Operation; Setting Present Time - Daikin FTX-N/U Manual

FTX-N/U, FVXS-N, FDMQ-R Series
TIMER ON BUTTON "
17
Press this button to set the present
time and the programmed time.
HOLIDAY SETTING
18
BUTTON "
Press this button to set holidays.
BUTTON FOR COPYING
PROGRAM OF PREVIOUS
19 DAY "
Use this button to set the No. of pro-
grammed time same as that of the pre-
vious day.
PROGRAM CANCELING
BUTTON "
20
Use this button to set the programmed
time to cancel. The display shows
" – ; – – ".
(Note)
1. Please note that all the displays in the fig-
ure appear for explanation purpose or
when the cover is open.

OPERATION

Setting present time (Fig. 3)
(Example)
1. Press the CLOCK ADJUSTING
1
BUTTON. The present time dis-
play flashes.
(NOTE)
• The present time needs adjusting in case
of turning power supply on for the first
time or the occurrence of power failure
over the period of 48 hours or more.
5
"
"
"
In case of setting Friday, 5:30
p.m.
2. Press the BUTTON FOR
2
SELECTING DAYS OF A WEEK.
"
Each time the button is pressed,
the day display shifts to the right.
(NOTE)
• The display " MON " follows the display
" SUN. "
Set the day to Friday.
3. Set the time with the HOUR/
3
MINUTE BUTTON. Each time the
HOUR/MINUTE BUTTON is
pressed, the display is put forward
minute by minute and hour by
hour. When the button is kept
pressed, the display is put forward
continuously.
(NOTES)
• After becoming " AM 11:00 ", when the
button is pressed, the display becomes
" PM 0:00 ".
• After becoming " 59 " (minute), when the
button is pressed, the display becomes
" 00 " (minute).
Set the time to 5:30 p.m.
4. Press the TIMER ON BUTTON
4
the moment the time signal of TV,
radio, telephone, etc. is heard.
The mark " : " flashes, and the
clock starts.
Press the TIMER ON BUTTON
in tune with the time signal at 5:30 p.m.
(NOTES)
• The clock used is of 12-hour type.
• When you turn power supply on, the sys-
tem may display "
minute and not start to operate after all the
liquid crystal displays appear at a time.
• If the CLOCK ADJUSTING BUTTON is
pressed by mistake, press it again to
return to the original state. As the clock
does not stop, the time indicated by the
clock is kept correct. In case of power
failure within 48 hours, the clock keeps
operating by utilizing the built-in battery.
441
EDUS091558E
" for about one
3P124623-5C