Daikin FTX-N/U Manual page 392

FTX-N/U, FVXS-N, FDMQ-R Series
1. Install the HA PCB (this set). (See Fig. 1)
1) Install the HA PCB (this set) to the electrical wiring box.
2) Insert the connector of the HA PCB (this set) to the connector (S403) on the electrical wiring box.
2. Connect the HA connection cord. (See Fig. 1 and 2)
1) Insert the HA connection cord into the HA connector, "S21" (white) on the HA PCB (this set).
2) Route the HA connection cord as shown in Fig. 2.
Fig. 1 Connection points of the HA PCB
Installing HA PCB on the electrical wiring box
Back of the HA PCB
Spacer
Fig. 2 Routing HA connection cord
Connecting HA PCB
S403
Electrical wiring box
HA PCB
390
Insert the cord into
the S403 connector.
HA connector,
"S21" (white)
HA PCB
HA connector,"S21"(white)
EDUS091558E
3P363899-2D