Huawei FusionServer Pro 5288 V5 Manual page 25

Huawei FusionServer Pro 5288 V5 Server
Technical White Paper
1
3
5
7
9
11
Port Description
Table 5-4 Ports on the rear panel
Port
(Optional)
10GE optical
port
(Optional)
10GE
electrical port
GE electrical
port
VGA port
Serial port
Issue 10 (2020-12-15)
(Optional) 10GE optical
port (LOM port 1)
(Optional) 10GE electrical
port (LOM port 1)
VGA port
GE electrical port (LOM
GE port 4)
Serial port
PSU sockets
Type
10GE SFP+
10GE BASE-T
1000BASE-T
DB15
RJ45
Copyright © Huawei Technologies Co., Ltd.
2
4
6
8
10
-
Quantity Description
2 10GE LOM service ports
(optical). Use the optical or
electrical ports based on
service requirements.
2 10GE LOM service ports
(electrical). Use the optical or
electrical ports based on
service requirements.
2 GE LOM service ports
(electrical).
1 Used to connect a display
terminal, such as a monitor or
KVM.
1 Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
5 Hardware Description
(Optional) 10GE optical
port (LOM port 2)
(Optional) 10GE electrical
port (LOM port 2)
GE electrical port (LOM
GE port 3)
Management network
port
USB 3.0 ports
-
18