Safety Information - Apollo Metis Owner's Manual

Safety information

WARNING
There is an increased risk of injury – even
fatal – if you do not follow instructions.
WARNING
There is a risk of serious injury – even fatal – if you do not follow instructions.
Managing the battery
 Use only batteries and chargers from
EVERGRAND with your bike. Use of other
battery packs can cause injury and involve a risk
of fire. If you use other battery packs,
EVERGRAND will assume no liability or
warranties.
Do not throw the battery pack into a fire.
The battery must not be exposed to direct
sunlight, or charged or stored in the vicinity
of high temperatures.
 Do not use the battery for any other purpose.
Avoid contact with metal objects (paper clips,
coins, keys, nails,screws or other small
metal objects, as this
short-circuit. Shorts caused in this way will
invalidate any warranty claims.
 Do not open the battery pack. This could
cause a short circuit.Opening of the
battery package will invalidate
warranty claims.
Do not connect, or disconnect the battery
pack / charger withwet hands.
 Keep the battery / charger out of reach of
children/animals.
How safe riding is ensured
While riding, do not focus your
attention too much on thescreen, as
this can lead to accidents.
 Ensure that the wheels are securely attached
to the bike beforeyou begin your trip. If the
wheels are not securely attached, the bike
may fall over, causing severe damage.
When riding a power-assisted bike, be sure
that you arecompletely familiar with the
starting characteristics of the bike before
riding on multi-lane roads and footpaths. If
the bike suddenly switches on, accidents
can happen.
If applicable, check that the bike lights are
working before youride at night.
may cause a
any
2
How safe maintenance is ensured
 Remove the battery pack from the eBike
before you start working on it (e.g., assembly
work, maintenance, working on the chain,
etc.), before transporting it by car or plane, or
before storing it. There is a risk of injury in
case of accidental activation of the eBike
system.
 Be sure to remove the battery before you
perform wiring orinstallation work on
the bike. Otherwise there is a danger of
electric shock.
When you install this product, be sure to
follow the instructionsgiven in the user
manual. We also recommend that you use
only genuine EVERGRAND parts. If nuts and
bolts are left loose or the product is damaged,
the bike may fall over suddenly and cause
serious injury.
After you have carefully read the user
manual, store it in a safeplace for later
reference.
 Ensure that unused connections are provided
with caps.
 Contact the retailer for installation and
adjustment of the product.
To allow riding in wet weather, the product is
designed to becompletely
Nevertheless, do not expose the product
intentionally to water.
 Do not expose the bike to high-pressure
cleaning. If water should penetrate into one
of the components, operating problems or
rust may result.
waterproof.