Turn off the power
Battery pack voltage too
during riding
low
Over current protection Remove battery pack from its frame and check
Battery capacity remaining indication
If you press the 'SOC' button, the LEDs will indicate the 'state of charge' (remaining total
capacity) of the battery, against its capacity when new.
Battery complete shut down
To completely shut down the battery press the 'Power/SOC' button the battery
management system will enter the power off mode.
Check battery pack output voltage. If its output
voltage is lower than 20V, please charge the
battery.
motor controller is broken or not.
Remaining total capacity
LED 1 Flashing : < 10% SOC
LED 1 ON : 11% ~ 25% SOC
LED 1 ~ LED 2 ON : 26% ~ 50% SOC
LED 1 ~ LED 3 ON : 51% ~ 75% SOC
LED 1 ~ LED 4 ON : 76% ~ 100%
11
Need help?
Do you have a question about the Metis and is the answer not in the manual?