Battery Fault Indication - Apollo Metis Owner's Manual

Battery fault indication

Error Condition
Cannot turn on Power ON/OFF switch
battery (these malfunction
LEDs have not
one-by-one
running flash)
Battery pack voltage
too low
Over
Turn on battery protection
pack, and battery Cannot discharge
cannot work
(these LEDs have
Battery
one-by-one temperature too high
running flash)
Battery
temperature too low
When the charger BMS
plug-in without problem
charging normally
(these LEDs have
not one-by-one
flashing)
When the charger Over voltage protection Do not charge battery pack, Check if the charger
plug-in without
charging normally
(these LEDs have
Battery
one-by-one temperature too high
flashing)
Battery
temperature too low
Over current protection Remove charger from battery and check charger
LED 1 ~ LED 4 ON : 76% ~ 100%
Catalog
Battery
manufacturer for repairing.
Check battery pack output voltage. If its output
voltage is lower than 20V, please charge the
battery.
current Remove battery pack from its frame and check
motor controller is broken or not.
Battery
manufacturer for repairing.
pack Touch battery pack outside surface. If its
temperature is too high, waiting for the battery's
temperature cool down to normal.
pack Touch battery pack outside surface. If its
temperature is too low, try to make battery pack
getting warmer. Please do not charge battery
pack when environment temperature is lower
than 0 degree C.
have some Battery
manufacturer for repairing.
is the right one or is normal or not. Keep it
discharge until over voltage protection removed.
pack Touch battery pack outside surface. If its
temperature is too high, waiting for the battery's
temperature cool down to normal.
pack Touch battery pack outside surface. If its
temperature is too low, try to make battery pack
getting warmer. Please do not charge battery
pack when environment temperature is lower than
0 degree C.
is broken or not.
10
How to do
pack needs to be
pack needs to be
pack need to be
Approx.
5 hours
returned to
returned to
returned to