Read Out The Fertility Profile; Frequently Asked Questions; When To Measure And How Often - uebe cyclotest baby Instructions For Use Manual

Operating the unit
Read out the fertility profile
To be able to read out the data, press – after you have attached the
cable – the large round Measurement button and at the same time
the small round Cycle Start button for approx. 3 seconds until "USB"
appears in the display.

Frequently asked questions

When to measure and how often?

You can start your daily measurement the morning after the cycle
start. What is important is that you have slept for at least 5 hours and
you have not got up in the hour prior to measurement. You do not have
to continue measuring when cyclotest® baby displays the long infertile
phase after ovulation, i.e. no baby symbols are shown.
Then, by clicking on the "Fruchtbarkeitsprofil
auslesen" button, you can read out and dis-
play the data from the unit.
Bild Nr. 25
Sie müssen jetzt bis zur Menstruation nicht
mehr messen.
EN-70