Installing The Usb Drivers For Cyclotest® Baby - uebe cyclotest baby Instructions For Use Manual

Operating the unit
You can print, save or mail these PDF documents.
To ensure that communication functions between cyclotest baby and
the PC, you must install the drivers for the USB port and the cyclotest
program. You can also download detailed installation instructions
from www.cyclotest.com.
Installing the USB drivers for cyclotest® baby
Supported operating systems: Windows Server 2008, Windows Server
2008 x64, Windows Vista, Windows Vista x64, Windows XP, Windows
XP x64, Windows 2000, Windows Server 2003, Windows Server 2003
x64, Windows 98, Windows ME, Windows 7, Windows 7 x64
Before you can read out the data from the cyclotest® baby unit, you
must first install the drivers for the USB port.
Important! Connect the supplied USB cable first to the PC and only
then to the cyclotest® baby unit.
Press – after you have attached the cable – the large round Measure-
ment button and at the same time the small round Cycle Start button
for approx. 3 seconds until "USB" appears in the display.
EN-65