Safety Instructions - uebe cyclotest baby Instructions For Use Manual

Safety instructions

Optimum functioning of your cyclotest® baby cannot be guaranteed
if you fail to observe the following safety instructions. Please read
through the entire instructions for use carefully before using the unit.
Follow the described procedure when using the unit on a daily basis.
• Check that the sensor is undamaged prior to measurement. De-
pending on where you use the sensor for measurement, a damaged
sensor could cause unintentional injury.
• While cyclotest® baby still "knows" too little about you, i.e. has
still not stored a sufficient amount of cycle values, a longer fertile
phase will be displayed. The fertile phase prior to ovulation can be
pinpointed more precisely only when at least six cycles have been
stored.
• cyclotest® baby has a waking function: Once you have been dis-
creetly woken by the unit, bring the unit into bed with you, place
the sensor under your tongue, press the large Measurement button
and wait until the unit beeps – done. All without having to get out
of bed!
• Using the unit in the immediate vicinity of mobile phones or
microwave appliances may result in impaired functioning. Use and
store the unit outside such an environment. Mobile phones should,
depending on their transmitting power, be kept at a distance of at
least 1 m from cyclotest® baby while the unit is in use.
• Do not under any circumstances open or modify the unit. This is a
medical product.
EN-46