Table of Contents
Advertisement
3.7. Count function
3.7.1 Choose samples. To precisely count the articles, firstly the quantity of
samples for counting should be chosen in according with the weights of
the articles. The quantity of samples can be chosen from
"1-10-20-50-100". For a small number of articles, the larger quantity of
samples, the more precise.
3.7.2 Place the samples on the pan, the balance will show the total weights of
samples. Then press "Count", balance will show "1", and unit will
show "pcs", which indicate that balance is now counting. And all the
samples are one unit. Then press "Count", the displaying will show
between 1-10-20-50-100. The quantity of articles must be the same
with the quantity of samples, and place the similar articles. The total
amount of objects is showed. Press the "Count" again back to the
normal situation.
4.
Attachment: settings and meanings
Turn on the Scale by pressing
function. the display shows C1 and the relevant number, which can be changed.
can change the parameters; pressing "TARE" can change the values of
Pressing
parameters.
4.1 C1------ sensitivity setting 0 1 2 3 4, the larger number is, the less sensible but
the better stable. Default setting is 2 or 1
4.2 C2------filtering strength setting 0 1 2 3, the larger number is, the lower
reaction speed, but the better stable. Default setting is 2 or 1
4.3 C3------Baud rate setting 2(600) 3(1200) 4(2400) 5(4800) 6(9600). Default
setting is 2
4.4 C4------communication setting. "TARE" changes the lower unit. "kg/lb"
changes the higher units. This is the first data during communication. Default
setting is 27.
4.5 Re-pressing
4.6 Press "TARE" and do not loose till "F----3" (Balance should be switched on).
All the parameters can be reset to default settings. Re-calibration before using.
5.
Data Transmission
Balance is targeting data output interface RS232C and can be directly
connected to the printer. The following soft wares are needed, when connects to
computer:
key, in order to change the configuration and
after setting. Then the balance is auto calibrated to 0.
6 |
P a g e
Advertisement
Table of Contents
