Advertisement
in the weight window does not affect the unit in the unit weight window (which is always in
g).
3.8 Data output
For the electronic weighing apparatus, standard RS232 data output interface may be used,
which may be directly connected to printer. When not in the number input state, press "." key
to print counting data. Also, it may be directly connected to the computer interface.
4. Illustration of keys
Keys for entering numbers
0-9
In the number-entering state, it is a key for decimal. When not in the number-entering state, it is
.
the printing key.
In the number-entering state, it clears the entered numbers.
CE
When it is not in the number-entering state, press and hold the "CE" key followed by
pressing the "UNIT W.T." key and you are in the calibration mode.
In the number-entering state, press the "TARE" key, pretare the current entered value.
TARE
When it is not in the number-entering state, pressing the "TARE" key clears the current
weight.
In the calibration state, press the "TARE" key and you are out of the calibration state.
The unit in the weight window between kg(or g) and lb.
kg/lb
In the number-entering state, press the "UNIT W.T." key and the current entry is set as unit
UNIT
weight.
W.T.
In the number-entering state, press the "SMPI" key and the current entry is set as number of
SMPL
pieces.
To set the number of pieces, the displayed data in the weight display window must be more
than 0. Otherwise the set number of pieces is 0.
When the displayed data in the weight field is more than 0, accumulated weight value and
M+
value for number of pieces are re-established after the unit weight window displays the
accumulated number of operations for 5s, and the next accumulation is possible only when
the weight returns to 0.
Allowing you to get out of the accumulation state and clear the accumulated value.
MC
In the number-entering state, press the "QTY PST" key to set the current entry as the upper
QTY
limit of the quantity.
PST
When it is not in the number-entering state, the quantity window displays the preset quantity
and returns after 5s.
It clears the quantity preset value.
PST CE
Advertisement
