Big League Lawns CheckMate Installation Manual

Lawn striping kit clamp bracket

1161 E. Clark Road, Suite #220

DeWitt, MI 48820

800.411.0150

www.bigleaguelawns.com

CheckMate™ Lawn Striping Kit Clamp Bracket Installation Guide

Important

Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.

This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,

failure to properly maintain the product or used for a purpose other than that for which it is intended.

The duration of this warranty is expressly limited to one year parts and labor beginning from the date

of delivery to the original customer.

The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,

at its factory or authorized repair agent of any part that should prove deficient. Purchaser must

maintain the product under normal operating conditions at all times. Prior to operation, become

familiar with the attachment and any disconnect features. This product is not intended to be used in a

transport position or to be backed over curbs. When not in use, the product should be removed from

the mower and transported in a safe manner. Failure to follow these instructions will void the

warranty.

Table of Contents

Need help?

Do you have a question about the CheckMate and is the answer not in the manual?

Page 1 The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option, at its factory or authorized repair agent of any part that should prove deficient. Purchaser must maintain the product under normal operating conditions at all times.
Page 2 Congratulations on your new purchase! You are just steps away from creating a beautifully patterned lawn using your new CheckMate™ lawn striping roller. To ensure a long life of both your mower and roller, please be sure to follow the mounting recommendations below.
Page 3 Parts List Photo Part Description Quantity 3-Hole Mounting Bracket 2-Hole Mounting Bracket 1/2” x 1-3/4” Shoulder Bolt 3/8” x 2-1/2” Bolt 3/8" Flat Washer 7/16” Flat Washer 3/8” Spin Locknut...
Page 4 Step 2: Assemble Brackets on Mower Place the provided 1/2” x 1-3/4” shoulder bolt and 3/8” x 2-1/2” bolt through the 3-hole bracket on the outside of the frame. Next, place the 2-hole bracket on the inside of the frame and align with the bolts.
Page 5 3/4” wrench. Step 5: Enjoy Striping With Your New CheckMate™ Striping Kit Once tightened and everything is set, you are ready to start creating vibrant stripes and...