Advertisement
Shorthand Instructions
Read the safety guidelines, page 2. After pressing the keys in the left column, the message in the center will appear. For more
detailed instructions, see page 5. Once familiar with the controller, you may prefer these shorthand instructions.
Single Segment Shorthand Instructions
Keys to Press
Turn power on
START/STOP
Up Arrow (not down)
START/STOP
Up & Down Arrows
START/STOP
Up & Down Arrows
START/STOP
START/STOP
Up & Down Arrows
START/STOP
Ramp-Hold Shorthand Instructions
Keys to Press
Turn power on
START/STOP
Up Arrow (not down)
START/STOP
Up & Down Arrows
START/STOP
Up & Down Arrows
START/STOP
Up & Down Arrows
Continue entering values for the segments used. First segment not needed: enter a rate of 0000.
START/STOP
START/STOP
Up & Down Arrows
START/STOP
8
Display
IdLE
(If different message appears, press START/STOP.)
SPd1
-
SPd5
SPd 1
(Example of rate selected)
°F
or
°C
1900
(Example of temperature selected)
Hd
00.00
or hold time
S t r t
dELA
00.00
or Delay time
-o n-
Display
IdLE
(If different message appears, press START/STOP.)
SPd1
-
ProG
ProG
Ra 1
500
(example of rate selected)
°F 1
or
°C 1
1900
(example of temperature selected)
Hd 1
00.00
or hold time
S t r t
dELA
00.00
or Delay time
-o n-
Action
Select a firing rate.
Enter target temperature.
Enter hold time, if any.
Enter delay time, if any.
The kiln is now firing.
Action
Select "ProG" (program).
Enter segment 1 rate.
Enter target temperature.
Enter hold time, if any.
Enter delay time, if any.
The kiln is now firing.
Advertisement
