NEC DLP Cinema NP-NC1402L User Manual page 25

3
Slide the clamper to the hilt of the power cable.
This completes the attachment of the power cable stopper.
Removing the power cable from the power cable stopper
1
Push the clamper of the power cable stopper to unclasp it.
knob
2
Push the power cable clamper to open it wide enough to pull out the power cable.
clamper
knob
CAUTION
The projector may become hot temporarily when the power is turned off or if the AC power is disconnected while the projector
is projecting. Take care when handling the projector.
2. Installation and Connection
25