Names Of The Projector Parts - NEC DLP Cinema NP-NC1402L User Manual

Table of Contents

Advertisement

1-3. Names of the Projector Parts

1-3-1. Front of the projector
3
4
1. LIGHT status indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source is off
(See page 61).
2. SYSTEM status indicator
These indicate the status of the projector. When the projector is operating normally, these light/blink in green or orange. When
an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen. (See page
61)
3. Main power switch
While AC power is being supplied, set the main power switch to ON position (1), then your projector will enter a standby state.
4. AC input
Connects to the AC power cable. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC
power cable.
5. Power cable stopper
Prevents the power plug from falling out from the projector.
6. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of pro-
jected screen. (See page 19)
7. Connection terminals
Various image signal cable are to be connected here. (See page 18)
You can expand signal input terminals by installing the optional board.
Contact your dealer/distributor for more information on separately sold optional products.
8. Air inlet
The air inlet for cooling inside the projector. Do not cover.
9. Remote interlock connector (inside front of projector)
This port is for safely using the laser in this device. It is used to externally control the laser illumination in the projector. Consult
with your dealer/distributor about using this.
10. Lens (optional)
Images are projected from the lens. Request your dealer/distributor to install or replace the lens.
Do not cover the air inlets and outlet while the projector is in operation. Insufficient ventilation leads to a rise of the
NOTE
internal temperature and may cause a fire or malfunction.
1. What's in the Box? and the Names of the Projector Parts
2
5
1
6
7
8
9
10
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlp cinema np-nc1202l

Table of Contents