Sanwa U-50D Operator's Manual page 15

Measurement of
250-1000 volts
50-250 volts
10-50 volts
2.5-10 volts
0-2.5 volts
c Test Lead Connections.
RUCTIONS^.
The test leads connected to the meter are applied
across the voltage to be checked. Since alternating
current is being measured, the readings are correct
to which side of the voltage the test leads are con­
nected. (Fig. 2-3 & -4)
d Scale Reading.
top marked
AC 1 0V UP
ments except for the 2.5 volt range, for which the
black scale below marked
Proper range to be used
See GENERAL INST­
Use the red scale third from the
for all AC voltage measure­
AC 2 .5 V
13 —
1000V
250V
50V
10V
2.5V
is used. (Fig. 2-5)