[Power Management] - NEC ME403U User Manual

Hide thumbs Also See for ME403U:
Table of Contents

Advertisement

Expand
Language
Auto setup
Keystone
Security
Power management
Filter
Test pattern
Network setup
Control ID
Factory default
Lamp counter reset

[Power management]

To reduce power consumption and maintain life cycle of light source, the power management function will turn off
the projection light source if your projector has no signals for a period of time.
1) Press ▲ ▼ button to select [Power management] menu.
2) Press <ENTER > button.
3) Press ▲ ▼ button to switch required item.
Ready......the power light indicator flashesgreen when the lamp is fully cooled down. The light source turns on
again if an input signal is connected or any key (except the power button ) on the side panel and remote controller
is pressed during this period of time.
Shut down......The projector shut down after the light source is fully cooled down.
Off......Disable the power management function.
Timer......Once the input signal is interrupted and no keys has been pressed for 30 seconds afterwards, the "No
signal" message displays in the timer. The timer counts down until the light source turns off. Press arrow key to set
up the timer in range of 1~30 minutes.
Ready countdown......Set the interval from ready mode change to standby mode (0 to 30 minutes) automatically.
When it is set it to zero, the projector will never change automatically. Press the Power key to change your projector
into standby mode and any other key to power on.
NOTE:
• Factory default for standby time: 5 minutes. Count down for ready mode: 5 minutes.
• When selecting [Off], the [Timer] and [Ready countdown] is unavailable.
• When selecting [Shut down], the [Timer] is unavailable.
Expand
Language
Auto setup
Keystone
Security
Power management
Filter
Test pattern
Network setup
Control ID
Factory default
Lamp counter reset
. . .
Expand
Ready
Shut down
Off
Timer
. . .
Ready countdown
Expand
Security
PIN code lock
PIN code change
Power management
5 Min
5 Min
49
5. Using On-Screen Menu
Off
No signal
0 1
Remaining time before
poweroff the light source.
:
2 0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Me423wMe383wMc423wMc393wMe453xMc453x

Table of Contents