Advertisement
7. Equipment
ㆍCheck pointㆍ ※You must check the details below after installing the seat.
After checking, if the main frame of the car seat can be moved by more than 3 cm in any direction,
(If not using the seat back)
The car fixing plate and the car seat-beat must be fixed.
The car seat-belt is not twisted.
please install it again according to No. 1~3.
Have a child sit in the junior seat after putting the safety seat
on the car seat.
Confirm that the lower part of the child's belly is resting on the
seat well.
Pull the car seat-belt, and then adjust so that the seat-belt in
the horizontal direction passes under the lower part of the car
seat armrest. Pull the belt of the shoulder part diagonally so
that it can pass through the hook part of the head restraint.
Then insert it into the buckle.
Notice
Ensure that the car seat-belt is not twisted
The belt of the shoulder part must pass over the upper side
of the child's shoulder, and the belt in the horizontal direction
must pass over the lower part of the child's belly.
Advertisement
