Teka TBC 64000 XFL BK User Manual page 41

fig. 5
5 To make the electric connection betwe-
en the two appliances, attach the hob's
connector to oven's connector.
6 Complete the definitive positioning of
the oven, ensuring that the cardan teles-
copic shafts are firmly in position and
that the telescopic pipes are well-aligned
when inserted so that sliding is
quite simple.
7 Position the controls on the front of the
oven.
8 To operate the control knobs, they first
have to be pressed in, and then turned
in order to release the safety device.
37
Retention clips
Pins
Rear view of the Control Panel:
Flexible supply cable
Connector
Protective box for electrical assembly
If the cardan telescopic shafts are too
short, extensions can be added (not provi-
ded, but available as an accessory).
These are added by pressing, and they
are fixed by the cover that is included.
GB
fig. 6