Advertisement
Function, Care & Set Up Procedure
1.0 Function
The monitor measures the indoor temperature of its surrounding area and
receives temperature and moisture level data from the remote sensor.
1.1 Care of the Device
• Avoid exposing the unit to extreme temperatures, water or severe shock.
• Avoid contact with any corrosive materials such as alcohol, cleaning agents or
perfume.
• Do not subject the thermometer to excessive force, shock, dust, temperature or
humidity. Any of these conditions may shorten life of the unit.
• Do not tamper with any of the internal components of this unit.This will void the
warranty and may cause damage.
1.2 Correct Usage of Batteries
• Do not mix standard and rechargeable batteries.
• Do not mix new and old batteries.
• When the low battery symbol (
with new ones.
2.0 Set Up Procedure
1.Remove the printed vinyl label from the LCD screen of the monitor.
2.Position the remote sensor near the monitor.
3.Using a screwdriver (not included) remove the screws from the back of the
remote sensor and open the battery compartment. Slide the channel selector
switch to the desired channel.
4.Remove the battery cover from the monitor and insert 2 x AAA batteries
according to the polarity indicated.
5.The monitor will now display the current indoor temperature and the RF signal
(
) will flash for 3 minutes, indicating that the monitor is ready to pick up the
transmission from the remote sensor.
6.Insert 2 x AAA batteries into the remote sensor according to the polarity
indicated.
) appears on the display, replace all batteries
2
Advertisement
