Siemens HR676GB.6B User Manual And Installation Instructions page 15

Table of Contents

Advertisement

To set a later end time, turn the rotary selector.
3.
Press
to start the operation.
4.
a The status bar shows a notification when the opera-
tion starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
Once the cooking time has elapsed:
5.
Press
to silence the audible signal manually.
To set another cooking time, press
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
⁠ .
When the food is ready, press
appliance off.
11  Steam
Food can be cooked particularly gently using steam.
You can use the special types of steam heating, or use
steam assistance with certain types of heating.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
Open the appliance door carefully.
Keep children at a safe distance.
11.1 Filling the water tank
WARNING ‒ Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank.
Only fill the water tank with water or with the descal-
ing solution we have recommended.
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
Wait until the water tank has cooled down from the
previous operation.
Remove the water tank from the tank recess.
Requirement: The water hardness must be set cor-
rectly.
→ "Before using for the first time", Page 11
Press
⁠ .
1.
a The control panel will pop out automatically.
Pull the control panel towards you with both hands
2.
and then push it upwards until it clicks into place
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
Press
1.
a The time-setting options menu opens.
Press
2.
Use the rotary selector to reset the end time to zero.
3.
a The appliance starts to heat and the time starts to
count down.
Changing the end time
and use
The set end time can only be changed when the oven
is in standby mode
Press
1.
a The time-setting options menu opens.
to switch the
Press "
2.
Turn the rotary selector to change the end time.
3.
Press
4.
Lift the water tank and remove it from the water tank
3.
recess
Press down on the water tank lid along the seal to
4.
prevent water from leaking out of the water tank.
Fill the water tank with water up to the "max" 
5.
mark.
⁠ .
⁠ .
⁠ .
⁠ .
end".
to resume operation.
⁠ .
Steam en
15

Advertisement

Table of Contents
loading

Table of Contents