Table of Contents
Advertisement
en Basic operation
Setting
3 (hard)
2
4 (very hard)
Only set this if you will be using solely softened water.
1
Also set for mineral water. Only use non-carbonated mineral water.
2
7.2 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Note: You can also enter the settings using the Home
Connect assistant. In this case, press
last point in the initial configuration. If your appliance is
connected, follow the instructions in the app.
Setting the language
Use the rotary selector to select the required lan-
1.
guage.
Press .
2.
a The next setting appears.
Setting the time
Turn the rotary selector to set the current time.
1.
Press .
2.
a The next setting appears.
Setting the date
Use the rotary selector to set the current day.
1.
Press .
2.
Use the rotary selector to set the current month.
3.
Press .
4.
Use the rotary selector to set the current year.
5.
Press .
6.
Setting the water hardness
Use the rotary selector to set the hardness.
1.
Press .
2.
a A notification appears on the display confirming that
the initial configuration is complete.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
The
button lights up blue.
‒
a The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press
to switch the appliance off.
▶
The light above the
‒
a The appliance switches off. Any functions currently
in progress are cancelled.
12
Water hardness in
mmol/l
2.5-3.8
Above 3.8
to go to the
button goes out.
German hardness in
°dH
14-21.3
Above 21.3
7.3 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
Remove the product information and the accessor-
1.
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Fill the water tank .
3.
Press
to switch the appliance on.
4.
Apply the following settings:
5.
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 12
Press
to start the operation.
6.
Ventilate the kitchen while the appliance is heat-
‒
ing.
When the cooking time has elapsed, press
7.
switch the appliance off.
Once the appliance has cooled down, clean the
8.
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Empty the water tank and dry the cooking compart-
9.
ment.
→ "After every steam operation", Page 17
Clean the accessories thoroughly using a detergent
10.
solution and a dish cloth or soft brush.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
Press
to start the operation.
▶
a The settings, the run time and the heat-up line ap-
pear on the display.
French hardness °fH
25-38
Above 38
4D hot air
with added
steam ("high" intensity)
Maximum
1 hour
to
Advertisement
Table of Contents
