Table of Contents
Advertisement
Connecting or Disconnecting Implement Safety Instructions and
Practices
Do not stand or allow bystander or coworkers between the loader and the
tractor while installing or disconnecting the loader from the tractor. Keep
hands and body clear of the loader and the loader mounts. Serious injury
or death can result from a person being crushed between the tractor and
loader.
Never allow anyone to get under the loader or attachment or to reach
through the loader lift arms when raised. Serious injury could result from
crushing or pinching by the loader or attachment.
Make sure the loader is properly attached to the tractor and the retaining pins securely lock
the loader into position. Improper mounting of the loader onto the tractor can result in the
loader falling causing serious injury.
Make sure all tractor and loader guards are in place and properly functioning. Do not use an
attachment if the roll back guards are damaged or missing. The roll back guards prevents
items carried in the attachment from rolling back onto the operator causing serious injury.
For added safety when lifting loads above the height of the operator, install a certified
Falling Object Protective Structure.
Maintenance and Service Safety Instructions and Practices
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious
injury may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
Always maintain the safety signs in good readable condition. If the safety signs are missing,
damaged, or unreadable, obtain and install replacement safety signs immediately.
Do not modify or alter this Implement.
Implement, any of its components or any Implement function.
AGR-BGR-BRGR 08/20
© 2020 Alamo Group Inc.
SAFETY
(SL-03)
Safety Section 1-11
(SL-06)
(SL-23)
(SL-28)
(SG-2)
Do not permit anyone to modify or alter this
(SG-5)
(SG-8)
Advertisement
Table of Contents
