Learning Mode - EverFocus Smart Heavy-Duty Vehicle TPMS Solution Quick Installation Manual

5. Continue to set up the pressure low limit for the other tires. Use Pressure Unit button
and Temperature Unit button
pressure high limit is 95.0psi. Press Backlit button
Current Tire
Configured
3.4.4 Backlit Color Setting
In Normal mode, press Backlit button
turn backlit on / off. When the backlit is turned on, press Power Switch button
change backlit color. Press Backlit button
3.4.5 Mute Setting
In Normal mode, press Backlit button
enable / disable sound.

3.5 Learning Mode

The sensors have been paired off with the tires during production. However if the tires are
replaced, you can still pair the sensors with the tires in Learning Mode. You can pair all tires at
once or just pair a single tire.
3.5.1 Pair All Tires
To pair all tires with sensors at once:
1. Put the supplied EV-S01 Battery into the sensor.
2. Turn on the main unit and put the sensors near it, later the main unit can detect the
sensors more easily.
3. In Normal mode, press Temperature Unit button
seconds to enter the Learning mode. The backlit turns blue and the system will start to
search the nearby sensors.
Smart Heavy-Duty Vehicle TPMS Solution
to increase or decrease temperature value. The default
to save and exit.
Low Voltage = Low Pressure Limit Setting
Pressure High
Limit
Current Pressure
Unit
Pressure Low Limit
and Pressure Unit button
to save the current color and exit.
and Power Switch button
and Pressure Unit button
17
+1
-1
Save
for 5 seconds to
to
for 2 seconds to
for 5