EverFocus Smart Heavy-Duty Vehicle TPMS Solution Quick Installation Manual page 10

2.3 Antenna Extension Cable Installation
1. Connect the antenna cable of the repeater or the trailer receiver with the supplied 10m
antenna extension cable.
2. Wire the antenna extension cable along the vehicle's body wiring to the chassis that near
the rear wheels.
3. Fix the antenna using the supplied Cable tie. Do not twist the antenna cable and make sure
the antenna does not touch any metal parts.
4. For closed chassis, fix the antenna using the supplied Cable holder. When use screws to fix
the Cable holder on the chassis, make sure to prepare screws of proper length in avoiding
damage of the oil tank.
Antenna Extension Cable
5. Use the supplied Adhesive lined polyolefin tubing to secure the antenna connector.
Antenna
Extension
Cable Tie
Cable
Cable Tie
Cable
Holder
9
Smart Heavy-Duty Vehicle TPMS Solution
Antenna
Extension
Cable
Antenna Extension Cable
Cable Holder