Mounting The Storage Trays - B. Braun Aesculap ECCOS Instructions For Use Manual

Storage system for mechanical motor preparation

6. Mounting the storage trays

Fasten the storage trays with the enclosed bolts (TA 004 656) and nuts
(TA 005 152) in a suitable basket (see chapter 5). Use the tools
enclosed in the mounting set GB 473 for this purpose.
Ø Only install the storage trays horizontally on the
basket bottom.
Pull back the sleeve on the screwdriver as far as it will go and put one
of the bolts onto the blade of the screwdriver (fig. 2). Push forward the
sleeve until the bolt is fixed (fig. 3).
Fig. 2
Fig. 3
Insert 2 nuts in the holes of the key (fig. 4). Align the storage trays in
the basket and fasten it with the bolts and nuts (fig. 5).
Fig. 4
Fig. 5
Do not install the storage trays too close to each other in order to
ensure that the spray jet of the washing machine can reach the
components from all sides. When installing the storage trays, please
take care that there is enough space in front of the components so
that the latter can be withdrawn from the beds without knocking
against other parts.
Note
When using the storage tray GB 562 R, install the shaft support in a
way so that no fluid can get into the tool holder.
15