Table of Contents
Advertisement
Available languages
Available languages
10
3
Programming mode
Fax subscribers
This handset is a LINK BOX GAP 300/5000 with a fax machine or modem
connected. Call-waiting tones are not signalled. With a fax subscriber, any
calls cannot be queried using "pick up".
Factory setting: 0
3.2.5 De-registering a handset
Function
De-registering a handset
The corresponding handset is no longer registered.
3.2.6 Connection pick-up (SBCT = Single Button Call Transfer)
Function
SBCT
The partner handset that has been assigned is deleted.
SBCT
Four pairs with "partner handsets" can be configured. Each handset can
only be part of a specific pair. An active call can be transferred by
pressing the "On" key on the partner handset. This feature functions in
both directions between the partner handsets. It can be used to set up a
call using a handset and subsequently continue the conversation using a
DECT headset. Please bear in mind that a handset with this function is
unable to establish an outgoing call as long a call is being made on the
partner handset.
Default setting 0
14
1...8
1 #
Parameter
Mob. no. Inputs
code
15
1...8
#
Parameter
Mob. no. Inputs
code
16
1...8
0#
16
1...8
Partner#
3
Programming mode
3.2.7 Direct dial-in
Function
Parameter
code
Direct dialling in
21
Calls to lines 1 and 2 are signalled on the handsets according to the call
assignment.
Direct dialling in
21
Calls on the lines are accepted by the LINK 2800 DECT/GAP, the caller
hears a signal tone and can trigger signalling on the relevant handset
after direct dialling the DTMF numbers 1...8. If no direct dialling is
detected within 5 seconds, the signalling is carried out according to the
call assignment. If the selected handset does not answer, the signalling
process is continued according to the call assignment.
Factory setting: 0
3.2.8 Call-waiting
Function
Parameter
code
Call waiting
22
If an external or internal call is present, another external call for that
handset will not be signalled.
Call waiting
22
If an external or internal call is present, another external call for that
handset will be signalled by a call waiting tone.
Factory setting: 1
11
Inputs
0 #
1 #
Inputs
0 #
1 #
Advertisement
Chapters
Table of Contents
