Drawer Installation; Model And Serial Number Location; Care, Cleaning And Maintenance; Before You Call For Service - Beko MWDR24100SS Installation Manual

4 INSTALLATION INSTRUCTIONS

Drawer Installation

A
Parts Supplied
B
4 Screws
Figure 5
1. Place the drawer adjacent to the wall or cabi-
net opening. Plug the power supply cord into
the electrical outlet.
2. Carefully guide the drawer into the prepared
opening. Avoid pinching the cord between the
oven and the wall.
3. Slide the drawer all the way until the mounting
flange is flush with the face of the cabinet. See
Figure 5A.
4. Open the drawer. Using the 4 holes on the
drawer as a template, pre drill the cabinet us-
ing a 1/16" bit. See Figure 5A.
5. Secure the drawer with the 4 screws supplied.
See Figure 5B.
8 / 15 EN
TINSKB300MRR0_Beko_24" Drawer MWDR24100SS_Install.indd 8 TINSKB300MRR0_Beko_24" Drawer MWDR24100SS_Install.indd 8
Model and Serial Number
Location
The nameplate includes model number and
serial number. Open the Drawer Microwave fully.
The label is slightly beyond the back wall of the
microwave cavity facing up from the flat surface.
Care, Cleaning and
Maintenance
Refer to the Use and Care Manual for cleaning
instructions.
Mounting Screws

Before You Call for Service

Read the BEFORE YOU CALL FOR SERVICE and
operating instruction sections in your User Manual.
It may save you time and expense. The list includes
common occurrences that are not the result of
defective workmanship or materials in this range.
Refer to the warrant for toll-free service number
and address. Please call or write if you have
inquiries about your microwave product and/or
need to order parts.
Drawer Microwave Oven / Installation Manual
8/21/20 11:16 AM 8/21/20 11:16 AM