Table of Contents
Advertisement
14a.
If the VPN Type of the tunnel you have set up in the WLR-5001 is L2TP
over IPSec You have also entered a Shared key in the WLR-5001(see
step 7 of chapter Using the Wizard to Configure the WLR-5001 for
L2TP over IPSec for reference).
Click on IPSec Settings...
14b.
Check Use pre-shared key for authentication.
Key, Enter the shared key you have entered in the WLR-5001.
Advertisement
Table of Contents
Need help?
Do you have a question about the N600 X5 and is the answer not in the manual?