Table of Contents
Advertisement
LAN settings
The LAN tab gives you the opportunity to change the IP settings of the WLR-
5001.
Click <Apply> at the bottom of this screen to save any changes.
IP address 192.168.0.1. It is the router's LAN IP address (Your LAN clients
default gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree
function is enabled, this router will use the spanning tree protocol to prevent
network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server.
When DHCP is disabled no ip-addresses are assigned to clients and you have to
use static ip-addresses. When DHCP server is enabled your computers will be
assigned an ip-address automatically until the lease time expires.
Lease Time Forever. In the Lease Time setting you can specify the time period
that the DHCP lends an IP address to your LAN clients. The DHCP will change
your LAN client's IP address when this time threshold period is reached.
Advertisement
Table of Contents
Need help?
Do you have a question about the N600 X5 and is the answer not in the manual?