Sony XM-2252HX Marketing Specifications Product Manual

2000 MOBILE PRODUCT GUIDE – PART 2
• 225 W x 2 Ch at 0.04% THD at 4 Ω
• 300 W x 2 Ch at 0.1% THD at 2 Ω
• 600 W x 1 into 2 ohms at 0.1% THD 4 Ω
• Discrete Dual Differential Inputs
• Discrete MOSFET Outputs
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs (at 14.4 VDC)
Hi-Current/Hi-Voltage:
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Low Boost
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
24
XM-2252HX
2/1 Channel Amplifier
OTL (output transformerless) Circuit
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
Speaker Terminals – through out pin jacks
1-8 ohms (stereo)
2-8 ohms (when used as bridging amplifier)
115/225 W x 2 (20-20 kHz, 0.04% THD), at 4 Ω )
150/300 W x 2 (20-20 kHz, 0.1% THD), at 2 Ω )
300/600 W x 1 (20-20 kHz, 0.1% THD), at 4 Ω )
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 ohms)
0.2-4.0 V (RCA pin jack); 0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
0-10 dB (40 Hz)
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 55A (4ohm hi voltage mode)
Remote Input: 2 mA
Approx. 282 x 50 x 500 mm (11
Approx. 5.4 kg (11 lb. 15 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
Design and specifications subject to change without notice.
• Dual MOSFET Switching Power Supplies
• Switchable Hi-Power/Hi-Current Mode
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• 40 Hz EQ Boost, Hi Level In, RCA Passthrough
• Fan Cooling with DC Motor
/ x 2 x 19 / in.) (not incl. projecting parts and controls)
1 3
8 4