Behringer Power Overdrive PO300 User Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER POWER
OVERDRIVE PO300. This high-quality effects pedal enables you to produce super thick,
tube-like overdrive plus endless sustain. Thanks to its high-performance features you
can achieve classic hard rock or heavy metal overdrive sounds.
The LEVEL control adjusts the output level.
The PHAT control modifies the frequency range to achieve a more robust and
"fatter" sound.
The POWER control adjusts the strength of the sound. High settings provide a
more mid-accentuated sound, while low settings cut away some midrange energy.
The DRIVE control adjusts the amount of overdrive effect.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The PO300 has no on/off switch. As soon as you insert the plug into the IN
connector, the PO300 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
POWER OVERDRIVE PO300
1. CONTROLS
Top view