Behringer PB600 Quick Start Manual

PB600
Universal Effects
Pedal Board
Ultra-compact and lightweight pedal
board for transporting up to 6 effects
pedals, including patch cables
Generous 1.7 A power adapter
included for powering more
than 12 devices*—includes
1 x 6 daisy-chain cabling
Ultra-rigid plastic design withstands
even heavy impact
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
* Depends on the power consumption
of the effects pedals, etc.
behringer.com
Footswitches and Controllers
Pedal Board with 9 V DC Power Supply and Patch Cables
When effects are an integral part of
your rig, their power adapters and
patch cables can often be the most
vulnerable part, and the most likely
to sabotage your set if they're not
pampered. Rather than tossing your
pedals, power adapters and all other
cabling into a duffel bag after a gig,
keep them safe—and ready to rock
at a moment's notice—with
the PB600.
It's all about connections
This awesome pedal board makes
hooking up six 2.5" x 4.5" pedals as
easy as hooking up just one (of course,
if you're using pedals that aren't
2.5" x 4.5", the snug foam padding
can be cut to accommodate pedals of
varying shapes). The PB600 includes
¼" patch cables, so you can leave your
pedals connected to one another,
ready to pass signal even when you're
transporting them. It also comes with
1 x 6 daisy chain cabling so that when
you plug in the 1.7 A power adapter, all
your pedals receive power. Meanwhile,
all cabling remains safe and free of
strain. Failure is almost guaranteed
when you're dealing with a rat's nest
of loose cabling, but with the PB600,
your effects chain is always safe and
organized.
Continued on next page