Setting The Clock Automatically; Display The Clock; Sound Quality; Adjusting The Volume - Hitachi AXM549BT Instruction Manual

• If a power failure occurs or the unit is disconnected from the mains, the clock setting will
be lost.

Setting the Clock Automatically

Tune into a RDS station, press and hold the
update.

Display the Clock

In any source mode, the built-in clock shows the time on the display by press the

Sound Quality

Adjusting the Volume

To increase or decrease the volume, rotate the volume control knob (
press the volume up/down buttons (

Adjusting the Super Bass

You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the super bass button (
on the front panel. Press the Super Bass button (

Controlling the Loudness

This unit has a loudness function, which can automatically increase the bass sound effect at
low volume. It can also increase the bass sound effect at high volume, but it will be relatively
less when it is at high volume. Press the loudness button (
function, the " " will display on the front panel, press again will disappear.

Presetting Equalizer

You can adjust the sound reproduced simply by choosing from 5 preset equalizers.
During play, press the preset equalizer button (
select:
• [FLAT] (FLAT)
• [POP] (pop)
• [JAZZ] (jazz)
• [ROCK] (rock)
• [CLASSIC] (classic)

Changing the Front Panel Darkness

This unit has three brightness levels for you to adjust the clock display. Press the dimmer
control button ( ) on the front panel or the remote control repeatedly to choose the desired
DIM
brightness.
DISPLAY
) on the remote control.
VOL +/-
) on the remote control to get the effect, the "
S-BASS
S-BASS
P-EQ
GB-16
button. The clock will automatically
- VOLUME +
) again to cancel the effect.
) to obtain the loudness
LOUDNESS
) on the remote control repeatedly to
button.
CLOCK
) on the unit or
" will lit