Every 200 Service Hours - Kubota U17 Operator's Manual

EVERY 200 SERVICE HOURS

Do all 50 and 100 hour servicing at the same
time.
n Greasing of the Swing Bearing
1. Grease through the respective grease
fitting.
2. Grease at each 90º (1.58 rad.) position of
the swing frame.
Using the grease gun, apply 5 shots at
every position.
(1) Grease fitting
n Inspection and Cleaning of the Air
Filter Element
Open the engine bonnet and remove the
dust-cover. Take out only outer element,
clean the element,
reassemble. During reassembly, take care
to install the dust-cover so that its TOP mark
(arrow) faces up-wards. Do not remove the
inner element.
IMPORTANT :
l Should the machine be used in extremely
dusty areas, the air filter element must be
inspected and cleaned more frequently
than in the
periods.
l The air filter has a dry element, keep free
from oil.
l Do not run the engine without the air
filter.
(1) Outer element
(2) Inner element
(3) Dust-cover
(4) Clamps
case interior
specified maintenance
61
and