Cautions On Safe Use Of This Product - ESPO PATH SLIDE PRINTER Instruction Manual

Cautions on safe use of this product

* Be sure to follow the content shown below to use this product safely.
Do not carry out any item that is not shown in this section.
WARNING
Do not install the device at an unstable place or place
where there is vibration.
Otherwise, the device may drop or cause a fall and you
may get injured.
Do not connect or disconnect the power cord by a wet
hand.
Otherwise, electric shock may be caused.
Do not disassemble or modify the device.
There is are high-voltage points in the device and fire or
electric shock may be caused.
For inspection and repair, please contact the delivery
agent you purchased the product or our company's
customer service.
If a defect such as smoking and strange odor is generated
and the device is continuously used, fire or electric shock
may be caused.
Turn OFF the power switch immediately and pull out the
plug of power cord from the outlet, and then contact our
company's customer service.
Be sure to connect a grounding wire when you use the
product.
If a grounding wire is not connected to the grounding
terminal, electric shock may be caused.
5