Establishing A Bluetooth Connection - Silvercrest SBLH 10 A1 Operating Instructions Manual

5.4 Establishing a Bluetooth
connection
NOTES:
• The identification of the device is
"SBLH 10 A1".
• After switching on, the device automat-
ically tries to reconnect to the last
paired device.
• Please note that establishing the con-
nection may vary slightly depending
on the device and the software used.
• The device switches off if no Bluetooth
connection can be established within
10 minutes.
• If you pass the device on to someone
else, in order to protect your data and
your privacy, you should disconnect
the Bluetooth connection to the device
and delete it from the connection list
on your smartphone.
1. Keep the button
device is switched on. An audio signal
sounds and the LED 8 flashes white.
2. Switch on the audio device (e.g.
smartphone) and start the Bluetooth
connection.
3 pressed until the
GB
55