ElectrIQ PowerPod 2 Installation Manual page 9

The smart home battery solution
Table of Contents

Advertisement

Safety Warnings
BATTERY PACK WARNINGS:
There is danger of generating heat / smoke / rupture flames.
Do not disassemble battery pack.
Do not touch disassembled battery pack.
Do not reassemble battery pack.
Do not immerse the battery pack in any liquids or get it
wet.
Do not short circuit battery pack.
Do not incinerate or heat the battery pack.
Do not use or leave the battery near a fire, stove or heated
place.
Do not impact the battery pack or throw it.
Do not use a damaged and/or deformed battery pack.
Do not drive sharp objects into the battery pack, strike it
with any object or stand on it.
Do not place the battery pack on materials such as tools,
electric wire, screws, etc.
In case of a leak in the battery pack, avoid contact.
Do not touch your eyes if accidental contact with leaky
battery.
Do not expose to corrosive substances such as sea breeze,
steam or chemicals.
Do not install in humid places or places with condensation.
Do not install or use the Electriq PowerPod 2 if it has been
damaged in any way.
The ambient temperature (charging) must be between
0°C and 55°C; discharging temperature must be between
-20°C and 55°C; relative humidity must be between 10 and
90% to ensure optimal operation. Do not operate where the
temperature and humidity are beyond the specified limits.
High ambient temperature above 45°C will cause power
derating.
Installation Manual
9

Advertisement

Table of Contents
loading

Related Products for ElectrIQ PowerPod 2

This manual is also suitable for:

Pp2-acPp2-dc

Table of Contents