Table of Contents
Advertisement
Safety Warnings
In the event that Inverter, one or more batteries or Electriq PowerPod
2 is defective and needs to be removed, replaced, temporarily
uninstalled, disposed of, decommissioned or if Electriq Power
Customer Support authorizes a replacement (RMA), perform the
following steps:
1. Follow installation and service shut down.
2. Contact Electriq Power Customer Support at support@electriqpower.com.
MULTIPLE WARNINGS.
islanding protection: The Inverter monitors for sudden
changes in the impedance of the grid by looking for
changes in the second to the eighth harmonic.
Perform installation and wiring in accordance with all
applicable local electrical codes and standards.
Protection against lightning and resulting voltage surge
must be in accordance with local standards.
Using unapproved attachments or accessories could result
in damage or injury.
Use Class 1 wiring methods for field wiring connections
to terminals of a Class 2 circuit. Select the wire size based
on the protection provided by the circuit breakers / fuses.
Install properly rated over current protection as part of the
system installation.
To ensure optimal reliability and to meet warranty
requirements, the Inverter must be installed and/or stored
according to the instructions in this guide.
WARNING: Users should not attempt to service the Electriq
PowerPod 2.
Only an authorized technician should attempt to service
the Electriq PowerPod 2.
WARNING: Risk of injury and equipment damage. Protect
the Electriq PowerPod 2 from damage and improper use.
WARNING - ARC FLASH AND SHOCK HAZARD:
Appropriate PPE and Tools Required (protective eyewear
and gloves) while working on the energized equipment.
Voltages up to 600 VDC and 240 VAC Present. Arc Flash
Approach Boundary 1.0 m. Arch Flash Prohibited Approach
Boundary 24 mm.
Installation Manual
NOTE! Method of active anti-
11
Advertisement
Table of Contents
