Table of Contents
Advertisement
Safety Warnings
WARNING. Authorized service personnel should reduce
the risk of electrical shock by disconnecting AC, DC and
battery power from the inverter before attempting any
maintenance or cleaning or working on any circuits
connected to the inverter. Turning off controls will not
reduce this risk. Internal capacitors can remain charged
for five (5) minutes after disconnecting all sources of
power.
WARNING. Do not disassemble this inverter yourself. It
contains no user-serviceable parts. Attempting to service
this inverter yourself may cause a risk of electrical shock or
fire and will void the warranty from the manufacturer.
WARNING. To avoid a risk of fire and electric shock, make
sure that existing wiring is in good condition and that the
wire is not undersized. Do not operate the Inverter with
damaged or substandard wiring.
CAUTION. Under high temperature environment, the cover
of this inverter could be hot enough to cause skin burns if
accidentally touched. Ensure that this inverter is away from
normal traffic areas.
WARNING. During the installation process, drilling,
punching, and screwing the bolts can cause metal burrs,
which must be cleaned up to prevent them from falling
into the electronics.
WARNING. Use only recommended accessories.
CAUTION. To reduce risk of fire hazard, do not cover or
obstruct the cooling fan.
CAUTION. Do not operate the Inverter if it has received a
sharp blow, been dropped, or otherwise damaged in any
way. If the Inverter is damaged, call for an RMA (Return
Material Authorization).
WARNING. Exposed hazardous voltage, during servicing
or for emergency procedures use a lockable manual
breaker lockout on the main service panel disconnects to
enable Lock-Out-Tag-Out per the Standard for Electrical
Safety in the Workplace, NFPA 70E, and the Standard for
Workplace Electrical Safety, CSA Z462.
8
Installation Manual
Advertisement
Table of Contents
